English
Español
Français
LG Electronics
BLUETOOTH® Mono Headset
HBM-520 User manual
All rights reserved.
LG Electronics Inc., 2008
Note : For the best performance and
to prevent any damage to, or misuse of the
HBM-520, please read all of the information
carefully prior to using the HBM-520.
Any modifications or changes to this manual due to
typographical errors or inaccuracies of stated information
shall only be made by LG Electronics Inc.
Part Description
Front
How to use
Charging
-
-
Remove the cover on the charging port and connect the charger.
When the charger is connected, with power on or off, the Headset
will turn off.
While charging, the LED indicator will show a solid blue light.
The buttons will not function while the device is charging.
It takes 2 hours to fully charge the Headset.
LED indicator
Front MIC
Call Button
-
-
-
-
Charging Port
When charging is complete, the LED indicator will turn off.
Low battery
-
-
A low battery tone will play once every 30 seconds.
If the battery is not charged, the Headset will turn off.
Back
Power on
Speaker
-
Press and Hold the PWR button for 3 seconds.
�The power will turn on and a booting tone will play.
Power Button
Power off
Volume UP /
Down Button
- Press and hold the PWR button for 4 seconds.
�A shutdown tone will play, the Bluetooth link will disconnect,
and the power will turn off.
Rear MIC
Pairing
- Prior to using the Headset for the first time, you must pair it with a
Bluetooth-enabled handset.
- There are 2 Pairing Mode Methods with the HBM-520.
How to use
1) Easy Pairing
Change direction
�With the Power off, press and hold the PWR button for 3 seconds,
to turn on the HBM-520.
�The Headset will enter Auto-Reconnect mode, for 10 seconds
(If your Headset has been previously paired to the handset, the
Headset will automatically reconnect to the handset, when the
HBM-520 is powered on.)
�After 10 seconds, the HBM-520 will automatically enter Paring Mode.
�When the Headset enters Pairing Mode, the LED indicator will show
a solid blue light.
4
5
How to use
How to use
When the handset and HBM-520 are brought back within the required
distance, the HBM-520 will automatically reconnect with the handset.
- If the Headset and handset do not automatically reconnect when they
are back within the required range, briefly press the CALL button on
the HBM-520 to reconnect manually.
�Using your handset, find the Bluetooth Menu and “search for” or
“add” new devices.
Select “LG HBM-520” from the list of devices and pair it with your handset.
�
�When asked for the Pass/PIN code during the pairing procedure,
please enter “0000” (4 Zeros).
�Once pairing has completed successfully, you will hear a beep.
� After pairing successfully, be sure to “Connect” to the LG HBM-520.
� If you want to pair with a different device in the future, the Headset
must be placed in Pairing Mode.
� If the Headset is in Pairing mode for three minutes without being
connected to a handset, the HBM-520 will automatically turn off.
Volume control
- Press the VOLUME UP or VOLUME DOWN button to adjust the
speaker volume.
- There are eight levels of speaker volume.
Calling
2) Manual Pairing
Answering a call
- When there is an incoming call, the Headset will ring.
- Briefly press the CALL button to answer an incoming call.
� With the Power off, press and hold the PWR button for 5 seconds.
� When the Headset enters Pairing Mode, the LED indicator will show
a solid blue light.
� Using your handset, find the Bluetooth Menu and “search for” or
“add” new devices.
� Select “LG HBM-520” from the list of devices and pair it with your
handset.
� When asked for the Pass/Pin code during the pairing procedure,
please enter “0000” (4 Zeros)
Making a call
- If you make a call from the handset, the call will (subject to phone
settings) automatically transfer to the Headset. If the call is not
automatically transferred, you can manually transfer the call by briefly
pressing the CALL button on the HBM-520 (Headset and handset
must be paired).
� Once pairing has completed successfully, you will hear a beep.
� After pairing successfully, be sure to “Connect” to the LG HBM-520.
� If you want to pair with a different device in the future, the Headset
must be placed in Pairing Mode.
� If the Headset is in Pairing mode for three minutes without being
connected to a handset, the HBM-520 will automatically turn off.
Voice dialing*
- Briefly press the CALL button to activate “Voice Command”.
You will get the best results if you record the voice dialing tag through
your Headset.
NOTE: If the handset does not support Voice Dialing, it is possible
that performing this action will activate Last Number redial.
Last number redial*
Auto Reconnect
- Press and hold the CALL button for 1second to activate “Last Number
Redial”. The Headset will beep, and call the last number dialed.
Ending a call
- Briefly press the CALL button.
Transferring a call*
- While on a call on your handset, briefly press the CALL button to transfer
the audio to the Headset.(Headset and handset must be paired).
- And to transfer a call from the Headset to handset, press and hold
- When the HBM-520 turns off (accidentally or intentionally) while
connected to a handset, the Headset and handset will disconnect.
The Headset and handset will automatically reconnect when the
HBM-520 is turned back on.(as long as both devices are within
the required range of 33ft. or 10m).
[ Out of range ]
- When the HBM-520 and your handset are separated by a distance of
33 feet (10 meters)Doromworen,ltoheaHdeafdrsoemt anWd hawndwse.tSwoillmdisaconnuneaclt.s.com. All MVaOnLUuMaElsUPSbeutatorncfohr 5AsnecdonDdso. wnload.
6
7
|