Owner's
Manual
WARNING
Exercise can present a health
risk. Consult a physician
before beginning any exercise
program with this equipment.
If you feel faint or dizzy,
immediately discontinue use
of this equipment. Serious
bodily injury can occur if this
equipment is not assembled
and used correctly. Serious
bodily injury can also occur if
all instructions are not
followed. Keep others and
pets away from equipment
when in use. Always make
sure all bolts and nuts are
tightened prior to each use.
Follow all safety instructions in
this manual.
When calling for parts or
service, please specify the
following number.
75-2000
Pat. Nos. 5,779,598 &
6,063,008
Other patents applied &
are pending
CAUTION:
Weight on this product should not exceed 300 lbs.
MADE IN TAIWAN
This Product is Produced Exclusively by
Product May Vary Slightly
From Pictured.
2040 N. Alliance, Springfield, MO 65803
Customer Service Number
1 (800) 375-7520
2007, 11
2007 Stamina Products, Inc.
CALL US FIRST
THANK YOU FOR PURCHASING THE
Avari GX8 Elliptical Trainer
To help you get started, we have pre-assembled most of your
Avari GX8 Elliptical Trainer at the factory with the exception
of those few parts left unassembled for shipping purposes.
Simply follow the few assembly instructions set forth in this manual.
With regular workouts you will be getting your body into shape
and on your way to achieving a happier and healthier lifestyle.
Should you have any questions,
please call our Customer Service Department toll-free number,
1 (800) 375-7520
Monday - Thursday, 7:30 A.M. - 5:00 P.M. Central Time.
Friday, 8:00 A.M. - 3:00 P.M., Central Time.
TELEPHONE
CUSTOMER SERVICE
Tel: 1 (800) 375-7520
FAX
ONLINE
MAIL
CUSTOMER SERVICE
Fax: (417) 889-8064
CUSTOMER SERVICE
STAMINA PRODUCTS, INC.
ATTN: Customer Service
P.O. Box 1071
Springfield, MO. 65801-1071
3
BEFORE YOU BEGIN
Although Stamina constructs its products with the
finest materials and uses the highest standards of
manufacturing and quality control, there can
sometimes be missing parts or incorrectly sized
parts. If you have any questions or problems with
Thank you for choosing the Avari GX8. We take
great pride in producing this quality product and hope
it will provide many hours of quality exercise to make
you feel better, look better and enjoy life to its fullest.
Yes, it's a proven fact that a regular exercise
program can improve your physical and mental the parts included with your Avari GX8, please do
health. Too often, our busy lifestyles limit our time not return the product. Contact us FIRST!
If a part is missing or defective, please call us toll
free at 1-800-375-7520 (in the U.S.). Our Customer
Service Staff is available to assist you from 7:30A.M.
to 5:00 P.M. (Central Time) Monday through Thursday
and 8:00 A.M. to 3:00 P.M. (Central Time) on Friday.
If you would like to contact us online, go to our
Customer Service section.
and opportunity to exercise. The Avari GX8
provides a convenient and simple method to begin
your assault on getting your body in shape and
achieving a happier and healthier lifestyle.
Before reading further, please review the drawing
below and familiarize yourself with the parts that are
labeled.
Read this manual carefully before using the Avari
GX8.
Be sure to have the name and model number of
the product available when you contact us.
Battery
ATTENTION: Use only NiMH
(Nickel Metal Hydride) rechargeable
Warning Label
Computer
batteries with this product. The
higher voltage from other types of
batteries may damage this
equipment. Failure to use NiMH
rechargeable batteries will void your
warranty and may result in damage
to your machine. Stamina is not
responsible for non-compliance with
correct battery usage.
Pulse Sensor
Handlebar
Tray
Handlebar
Rocker Arm
Upright
Left Pedal Arm
Pedal Divider
Pedal Cap
Warning Label
Crank Disc
Covers
Nose Covers
Roller Cover
Right Pedal Arm
Link
Pedal Cap
Main Frame
Rear Stabilizer
Wheel
Socket Wrench
THE FOLLOWING TOOLS ARE INCLUDED FOR ASSEMBLY :
Allen Wrench (5mm)
Allen Wrench (6mm)
4
EQUIPMENT WARNING & NOTICE LABELS
This chart is provided to help identify the warning & notice labels on the Avari GX8. Please take a moment
to familiarize yourself with all of the warning & notice labels.
Labels are actual size
W1
WARNING LABEL(95)
W2
BATTERY WARNING LABEL(96)
5
HARDWARE IDENTIFICATION CHART
This chart is provided to help identify the hardware used in the assembly process. Place the washers, the
end of the bolts, or screws on the circles to check for the correct diameter. Use the small scale to check the
length of the bolts and screws.
3/16"
1/4"
1
5/16"
3/8"
1/2
1/2"
INCHES
0
0
1/2
1/2
2
3
1/2
4
1/2
5
1/2
6
in.
mm.
10 20 30 40 50 60 70 80 90 100 110 120 130 140 150
length
MILLIMETERS
6
8
10
12
NOTICE: The length of all bolts and screws except those with flat heads is
measured from below the head to the end of the bolt or screw.
Flat head bolts and screws are measured from the top of the
head to the end of the bolt or screw.
length
After unpacking the unit, open the hardware bag and make sure that you have all the following items.
Some hardware may be already attached to the part.
Part No. and Description
Qty
53
Clamp Washer (M6)
8
62
63
64
Bolt, Button Head (M6 x 1 x 12mm)
Bolt, Button Head (M6 x 1 x 16mm)
Bolt, Button Head (M10 x 1.5 x 25mm)
4
8
2
65
Bolt, Socket Head (M6 x 1 x 12mm)
8
70
71
Screw, Round Head (M5 x 0.8 x 15mm)
Screw, Round Head (M5 x 0.8 x 35mm)
12
5
75
76
Lock Washer (M6)
Lock Washer (M10)
8
2
77
78
Washer (M6)
Washer (M10)
4
6
79
84
Nut (3/8" - 16)
3
4
Nylock Nut (M10 x 1.5)
6
ASSEMBLY INSTRUCTIONS
Place all parts from the box in a cleared area and position them on the floor in front of you. Remove all
packing materials from your area and place them back into the box. Do not dispose of the packing materials
until assembly is completed. Read each step carefully before beginning. If you are missing a part please
L
Lift from the
Front Stabilizer
R
Make the tab face down
for assembly.
STEP 1: Attach the REAR STABILIZER(2) to the MAIN FRAME(1) with BUTTON HEAD BOLTS
(M10x1.5x25mm)(64), WASHERS(M10)(78), and LOCK WASHERS(M10)(76).
STEP 2: Thread the NUTS(3/8"-16)(79) all the way to the bottom of the threaded rod on the STANDS(59).
Lift the front stabilizer on the MAIN FRAME(1) and place a temporary spacer (wood block or thick book)
under the front of the MAIN FRAME(1). Thread the three STANDS(59) into the MAIN FRAME(1). Remove
the temporary spacer.
NOTE: See page 12 for detailed leveling instructions to prevent rocking.
STEP 3: Make the tab in the edge of the OVAL ENDCAPS(58) face down, then press the OVAL ENDCAPS
(58) into both ends of the front stabilizer of the MAIN FRAME(1).
STEP 4: Attach the PEDAL CAP(29L) to the LEFT PEDAL ARM(6) and the PEDAL CAP(29R) to the
RIGHT PEDAL ARM( 7) with SOCKET HEAD BOLTS(M6x1x12mm)(65).
NOTE:
It will be easier to attach the PEDAL CAPS(29L, 29R) to the PEDAL ARMS(6, 7) by raising the
PEDAL ARMS(6,7) and then attaching the PEDAL CAPS(29L, 29R). Please have a partner hold
the raised pedal arm as you attach the PEDAL CAPS(29L, 29R). This way you are not lying on the
floor trying to attach the PEDAL CAPS(29L, 29R).
7
ASSEMBLY INSTRUCTIONS
STEP 5
CAUTION: Be careful not to damage the BASE CONNECTION WIRE(18) and CONNECTION WIRE(19)
when assembling the UPRIGHT(3).
Attach the UPRIGHT(3) to the MAIN FRAME(1) with the NYLOCK NUTS(M10x1.5)(84) and WASHERS
(M10)(78). Plug the BASE CONNECTION WIRE(18) into the CONNECTION WIRE(19).
STEP 6
Connect the LINKS(36) to the ROCKER ARMS(4) at both sides with D-SHAPED SHAFT(42), WASHERS
(M6)(77), and BUTTON HEAD BOLTS(M6x1x12mm)(62).
8
|