L I N K - 8 0 0 A C T I V E F U L L R A N G E S P E A K E R
LINK-800 ACTIVE FULL
RANGE SYSTEM
USER MANUAL
Ꮨ CAUTION ƽ
RISK OF ELECTRIC SHOCK
WHARFEDALE PRO DIVISION
1. READ INSTRUCTIONS carefully before operating this product.
ƽ WARNING & SAFETY INSTRUCTIONS
7. CABLES - Use quality screened cables for signal connections.
2.
RETAIN these instructions.
8. ƽ ꢀ RIGGING • SUSPENDING • MOUNTING
The rigging, suspension or mounting of this speaker system can
expose members of the public to serious health risks and even
death. UNDER NO CIRCUMSTANCES ATTEMPT TO RIG,
SUSPEND OR OTHERWISE MOUNT THIS SYSTEM UNLESS
YOU ARE FULLY QUALIFIED AND CERTIFIED TO DO SO BY
RELEVENT LOCAL, STATE AND NATIONAL AUTHORITIES.
ALL RELEVENT SAFETY REGULATIONS MUST BE
3. COMPLY WITH WARNINGS - All warnings and instructions for
this product should be adhered to.
Ɖ
4. Ꮨ WATER & MOISTURE
- This Wharfedale Pro unit should
not be used near liquids. If should not have liquids placed on or in
close proximity as there are ᏘDANGEROUS VOLTAGES
present.
FOLLOWED. IF YOU ARE NOT PROPERLY QUALIFIED OR DO
NOT KNOW OF PERTINENT REGULATIONS, CONSULT
QUALIFIED PERSONNEL FOR ADVICE AND ASSISTANCE.
5. ƽ VENTILATION/AIR FLOW: This Wharfedale Pro unit
should not have its heat sinks obstructed from air flow. It should
not be situated in a built-in installation that may hamper air flow to
the heat sinks. It should not be placed near heat sources.
9. Ꮧ CAUTION: These professional loudspeaker systems are
capable of generating very high sound pressure levels. Use care
with placement and operation to avoid exposure to excessive
levels that can cause permanent hearing damage.
6. Ꮨ POWER SUPPLY: This Wharfedale Pro unit should be only
connected to a power supply as stated on the unit. Power supply
cables should be routed where they will not be walked on or
pinched by objects placed adjacent or upon them.
10. SERVICING - The user should not attempt to service this
product except that mentioned in this manual.
7. Ꮨ ELECTRIC SHOCK: Care should be taken that the
grounding of this unit is NOT defeated. Do not use this units
power cable with an extension cable unless the pins can be fully
inserted.
LINK-800 ACTIVE FULL RANGE SPEAKER
ꢀ Strong construction of premium grade MDF
ꢀ Protective grille
ꢀ Two balanced microphone/line Combination jack
ꢀ 60W /program output
with 3 poles XLR socket with level adjustment knob.
ꢀ Proprietary designed, high efficiency, high power
ꢀ High power output, low distortion, clear sound
Wharfedale Professional drive units
quality
ꢀ Available colours: Black, Red, Blue, White
ꢀ Power on and stand-by (mute) LED indicator
ꢀ Wall bracket included
ꢀ High and Low tone control
ꢀ Auto mute/on function
Unpacking
Wharfedale Pro Limited Warranty*
In the event of malfunction, contact your authorised Wharfedale
All Wharfedale Pro products are fully
Professional dealer or distributor for information.
checked before leaving the factory. After
unpacking please inspect cabinet for any
physical damage. Please retain the shipping
carton if possible and internal packing material in case the unit needs
to be returned. Please check as soon as possible the unit is
functioning. In the event of any damage please contact your dealer
immediately so that a written claim for damages can be made.
*Be aware that warranty details may differ from country to country. Contact your dealer or
distributor for information.
These terms do not infringe your statutory rights.
Operating/Use
1. Attach your screened signal cable to one of the inputs to The Link-
800 Active Full Range Speaker. The Link-800 Active Full Range
Speaker has two parallel balanced XLR and 1/4 inch jack input
sockets.
2. Make sure there is source material fed into The Link-800.
3. Ensure the unit is working (blue neon at front should glow).
4. Adjust your level control to required volume.
|