RANGE
COMPOSITION
Chilling means bringing the temperature of
cooked food from +90ºC to +3°C in a short
time lap to minimize bacteria proliferation and
avoid loss of food consistency and texture.
The ZANUSSI easyChill Blast
Chillers/Freezers reduce temperature to
+3°C at food core in less than 90 minutes
and down to -18°C in less than four hours.
After the Blast Chilling a holding cycle starts
automatically to respectively maintain food at
+3°C and -18°C. Blast freezed food has a
solid 6 months/1 year shelf life without loss of
flavour, nutritional values and weight. The
opportunity to prepare in a single shot the
food to be used in different times during the
week enables a better work scheduling and
therefore a sensible reduction in labour costs.
110723
56 KG - 20 GN 1/1
ZANUSSI
ACTIVE BLAST CHILLER / FREEZERS
P R O F E S S I O N A L
TECHNICAL DATA
CHARACTERISTICS
MODELS
FUNCTIONAL AND
CONSTRUCTION
FEATURES
BCF64A
110723
Power supply
Electric
Productivity per cycle - kg.
NF Regulations - chilling / freezing
UK Guide lines - chilling / freezing
Gross capacity (D.I.N. 8952) - l.
Cooling unit
43.2
64, 56
560
� Soft Chilling (Air temperature
–2°C).
Built-In
� Hard Chilling (Air temperature
–20°C).
External dimensions - mm
width
depth/with open doors
height
Internal dimensions - mm
width
depth
height
N° and type of door
Door hinges
800
835, 1570
2230
� All the probe-driven cycles feature
ARTE (Algorithm for Remaining
Time Estimation): the machine
displays the actual time needed to
end the cycle and to make planning
the activities easier.
� Holding at +3°C (automatically
activated at the end of each cycle).
� Turbo cooling: the chiller works
continuously at the desired
temperature. Ideal for continuous
production and for pastry application.
� Automatic recognition of the
insertion of the food probe (cycles
piloted either by food probe
temperature or by time)
680
450
1500
1
Right Side
GN 1/1; 600x400
Trays type
Max load capacity - trays h 65 mm - n°
Compressor power - HP
N° defrost in 24 hrs.
Refrigerant type
Refrigerant quantity - g.
Refrigeration power - W
Refrigerant power
at evaporation temperature - °C
Power - kW
12
3
3
R404a
3600
2810
-30
installed-electric
Noise level - dBA
Net weight - kg.
3.933
71.5
235
� Single sensor core probe as
standard.
Power supply - V, phases, Hz
400 V, 3N, 50
INCLUDED ACCESSORIES
1 SINGLE SENSOR PROBE CHILLER+C/FREEZER
REMOVABLE TRAY SUPPORT RACK FOR 20 GN1/1
1
4
ACTIVE BLAST CHILLER / FREEZERS
56 KG - 20 GN 1/1
� The control unit provides several
operating settings: time/core
temperature according to NF and UK � An audible alarm starts when the
regulations, time/air
temperature/probe personalised
according to national regulations,
sterilizing cycle: UV lamps built-in
(on request), 3 single sensor or
3-sensor temperature probes (as
accessory), ideal for meats,
automatic defrosting and manual
defrosting. All parameters are
programmable.
temperature, holding temperature,
HACCP accordance.
� Hot gas defrosting system.
� Thermostatic expansion valve to
optimize the cooling unit efficiency.
� Adjustable feet 150 mm high.
� Stand alone printer as accessory.
� PC connection as accessory, gate
RS 485. No water connections
required: Waste water can be
plumbed into drain, but can also be
collected in an optional waste
container.
cycle ends or terminates abnormally.
� Chilling times can vary according
to food quantity, density, moisture
contents and type of containers.
� Internal and external finishing in
304 AISI stainless steel and
backpanel in galvanized steel.
� HCFC, CFC and HFC free
insulation (Cyclopentane), HCFC
and CFC free refrigerant gas
� The control unit provides two large (R404a).
displays to read out: time, core
temperature, residual time, alarms,
service information.
� Developed and produced in ISO
9001 and ISO 14001 certified
factory.
� Inner cell with rounded corners.
� Door equipped with removable
magnetic gasket with hygienic
design.
� Evaporator with antirust
protection.
� Two customizable cycles for each
operating modes, allowing setting
time and air temperature. These two
programs (P1-P2) can be converted
into ice-cream specialist cycles
(shape maintenance and holding).
� All information related to the
different operating models are
recorded: date, time, cycle, core
� Ventilator swinging panel foreasy
access to the evaporator.
� Automatic heated door frame.
OPTIONAL ACCESSORIES
ACCESSORIES
MODELS
BCF64A
110723
3-SENSOR PROBE FOR CHILLER+C/FREEZER
60-MM PITCH ROLL-IN RACK FOR 20X1/1
80MM PITCH ROLL-IN RACK 14X1/1GN
KIT 3 SINGLE SENSOR PROBES FOR BC/BCF
KIT HACCP ADVANCED CONNECT. BC/BCF LW+CW
KIT HACCP EKIS
PAIR OF 1/1 GN AISI 304 S/S GRIDS
PLASTIC COATED GRID-600X400 MM
PRINTER FOR HACCP BASIC VERSION
RACK RAILS FOR VERTICAL BLAST CHILLER
REMOVABLE TRAY SUPPORT RACK FOR 20 GN1/1
RILSAN COATED GRID
880088
922203
922205
880269
880183
922166
921101
880864
881532
881182
881010
881061
922132
ZANUSSI
P R O F E S S I O N A L
TROLLEY FOR 20X1/1 ROLL-IN RACK
DCB03
2009-09-23
The Company reserves the right to alter technical specifications without prior notice.
ACTIVE BLAST CHILLER / FREEZERS
56 KG - 20 GN 1/1
110723
LEGEND
BCF64A
110723
EI - Electrical connection
400 V, 3N, 50
ZANUSSI
P R O F E S S I O N A L
DCB03
2009-09-23
The Company reserves the right to alter technical specifications without prior notice.
|