TuneStik
™
™
DIGITAL LIFESTYLE OUTFITTERS
Quick Start
About the DLO TuneStik
DLO TuneStik Quick Start
Thank you for your purchase of the DLO TuneStik FM Transmitter & RF Remote
for iPod. TuneStik is way more than just an FM Transmitter for your car. It’s a
multipurpose iPod tool that can help you enjoy your music in a variety of new
ways. A few suggestions:
We’ll get you up and running in 5 easy steps:
STEP 1 Connect the TuneStik FM
Transmitter to your iPod dock connector.
4
Use TuneStik to play your iPod not only in your car, but at a friend’s house, a
hotel room, a rental car, a boombox - anywhere there’s an FM radio you have
a set of speakers for your iPod.
3
STEP 2 Secure the TuneStik Control to
your car’s steering wheel.
MENU
The TuneStik Remote can be used totally separately from its FM transmitter
function. So if you use a cassette adapter/AUX Input in a car, or you hook your
iPod to your stereo with a cable at home, you can still use TuneStik’s high pow-
ered RF remote to control your iPod from afar.
STEP 3 Tune your car stereo to 88.5 FM.
STEP 4 Power on your iPod and select a
➊
playlist, album or artist.
1
5
2
T U N E S T I K
STEP 5 Press the Play/Pause Button on
TuneStik features a 30-pin pass-through iPod Dock Connector. That means you
can connect and use any iPod charger, sync cable, even other iPod accessories
- and still use TuneStik as an FM Transmitter and Remote - or just a remote -
or just the FM transmitter. TuneStik is very versatile iPod accessory when you
consider all the different options it provides.
your TuneStik Control.
You can now enjoy your iPod music through your car stereo. For more detailed
instructions, please read Setting Up Your TuneStik [pg. 9]. If 88.5 is not an available
frequency, please see Finding Empty Radio Frequencies [pg. 12]
4
|
DLO TUNESTIK USER MANUAL
|
5
Included in the Box
Controls + Connections
1
T U N E S T I K
1
3
2
30-PIN DOCK CONNECTOR
1
2
VELCRO STEERING WHEEL STRAP
STEERING WHEEL CRADLE
1
2
3
4
PASS-THROUGH DOCK CONNECTOR
2
T U N E S T I K
TUNESTIK REMOTE CONTROL
TUNESTIK FM TRANSMITTER
4
6
|
DLO TUNESTIK USER MANUAL
|
7
Using Your TuneStik
About the DLO TuneStik
Setting Up Your TuneStik
FREQUENCY MODE
INDICATOR LIGHT
Connect the TuneStik FM Transmitter to your iPod dock connector. Secure your
TuneStik Control to your car’s steering wheel using the included cradle and velcro
strap. You can position the steering wheel cradle anywhere you want on the wheel,
but on the sides nearest your thumb works best.
NEXT TRACK
PREVIOUS TRACK
PLAY / PAUSE
EXIT FREQUENCY MODE
Tune your car stereo to an empty frequency and then match that frequency on your
TuneStik. Press the Frequency Button on your TuneStik Control and “CH 1 88.5”
will be displayed on your iPod screen. You are now in Frequency Mode. You can use
the +/- Buttons to tune to the desired frequency displayed on your iPod screen.
TUNESTIK VOLUME DOWN
FREQUENCY DOWN
TUNESTIK VOLUME UP
FREQUENCY UP
The initial broadcast frequency for the TuneStik is 88.5. Your TuneStik can be pro-
grammed with preset stations for easy access with just a press of the Frequency
Button. For help doing this, please see Setting a Preset Frequency [pg.10] The pre-
set frequencies already set on your TuneStik are 88.5, 88.1, 94.9 and 107.9. To cycle
through these preset channels, simply press the Frequency Button on the TuneStik
Control.
iPod BACKLIGHT ON
MONO(00)/STEREO(88)
CYCLE THROUGH TUNESTIK PRESETS
PUSH TO CHANGE FREQUENCY
iPod CONTROLS
TUNESTIK REMOTE CONTROLS
If your TuneStik is connected and your iPod is not playing, you should hear silence.
If 88.5, or one of the other presets (88.1, 94.9 and 107.9) is not an empty frequency
in your area (i.e., there is music or talk already on that station) you may hear static.
Try finding another station with less interference. For help doing this, please see
Finding Empty Radio Frequencies [pg. 12].
The TuneStik is a “mini” radio transmitter that broadcasts your iPod audio through
the FM radio in your car. The TuneStik features a powerful RF Remote Control that
easily attaches to your steering wheel so you can control your iPod playback and
navigation without taking your hands off the wheel. It can also be used to play your
iPod at home, in a hotel, at a friend’s house – anywhere there’s an FM radio nearby.
8
|
DLO TUNESTIK USER MANUAL
|
9
To set another preset, press the Frequency Button twice to get to the next open chan-
nel on your TuneStik, then tune to the desired frequency using the +/- Buttons. Press
the Play/Pause Button to exit Frequency Mode, or simply wait to set this frequency as
your new preset. Repeat this process for up to four total presets.
Tuning Your TuneStik
Press the Frequency Button on the TuneStik Control. The red light on the top of the
remote will flash, and your iPod will display “Ok to disconnect” followed by “CH 1
88.5” (the default broadcast frequency for your TuneStik). This places the TuneStik
Control in Frequency Mode.
You can also turn the FM transmitter completely off by cycling past all 4 presets to the
OFF Setting. Then press the Play/Pause Button or wait a few moments to apply. To
turn the FM Transmitter back on, repeat these steps but stop at a Preset instead.
You are now able to change the frequency of your TuneStik to match the station on
your car stereo. To do this, simply press the Frequency Button to enter Frequency
Mode and tune up or down using the TuneStik Control’s +/- Buttons. Your iPod will
display the frequency to which your TuneStik is broadcasting.
Switching between Monaural and Stereo Mode
NOTE: Your TuneStik Control will allow you to tune the FM Transmitter in
Frequency Mode as long as you need to before reverting back to Primary Mode
after 10 seconds of inactivity.
With the DLO TuneStik you have the choice of transmitting in either Monaural or
Stereo Mode. Choose between the two based on what type of audio you’re playing and
what sounds best to your ears.
Monaural Mode allows for much better transmitter performance and is also useful for
listening to audiobooks and most podcasts. Use Stereo Mode when you have a clear
empty signal to broadcast to, and for best sonic musical performance. If the static
increases or you move to a crowded FM radio area, try Monaural Mode for the
strongest Transmitter signal strength possible.
Setting a Preset Frequency
You can set up to 4 preset stations when you find frequencies that work well in your
area. When you’ve found the station you’d like to keep, tune your TuneStik’s fre-
quency to that station (displayed on your iPod after you’ve pressed the Frequency
Button). Next, press the Play/Pause Button to set your preset and exit Frequency
Mode, or simply leave the TuneStik on that particular frequency (after a few sec-
onds, your TuneStik Control will revert to Primary Mode).
To switch between Monaural Mode and Stereo Mode press the Frequency Button, then
press the Backlight Button to toggle between Monaural Mode and Stereo Mode. Your
iPod will display 00 to indicate Monaural Mode and 88 to indicate Stereo Mode.
10
|
DLO TUNESTIK USER MANUAL
|
11
Controlling the TuneStik FM Transmitter Volume
Finding Empty Radio Frequencies
The TuneStik Control features +/- Buttons that control the TuneStik FM
Transmitter’s volume or “response.” While the +/- Buttons are a good way to con-
trol the volume, we recommend you adjust your TuneStik’s volume for best per-
formance, and then control the overall “loudness” with your car stereo.
What is an empty frequency? It’s a frequency on your car radio where you can’t hear
a radio station, where there is only static and not even a faint radio station can be
heard. If you live in a big city with a lot of radio stations, finding an empty FM fre-
quency can be tricky.
Certain levels of transmitter volume are better for different kinds of music, be sure
to set the transmitter volume at the level that best suits your music. For instance, a
classical song may require more transmitter volume than say, a metal song. Once
you’ve found an appropriate transmitter volume level, use your car’s stereo con-
trols to manipulate overall volume and EQ settings.
Here are some tips for finding an empty frequency:
• Be sure to search the entire spectrum of FM frequencies, from 88.1 to 107.9.
Don’t just look to the low end of the dial, because there are often empty FM
stations in the 100’s that will work great.
• When using the scan function on your car stereo, if your tuner stops on 101
and then jumps to 103, look in the 102 range of frequencies for an empty fre-
quency.
Using with a Cassette Adapter or Your Car’s MP3 Audio Jack
Even if you’re not using your TuneStik as an FM transmitter, it is a perfect way to
control your iPod from the steering wheel when using a cassette adapter or MP3
audio jack. First, connect the TuneStik FM Transmitter to your iPod. Then connect a
cassette adapter or your car’s MP3 audio jack to your iPod via the iPod headphone
jack. Now you can control your iPod without taking your hands off the wheel.
• Try scanning to a strong station, then backing down two frequencies - for
example 103.5 to 103.1. You can often find empty frequencies this way. If that
frequency is taken, scan to the next station and try again.
• Save a preset station on your radio when you find a frequency that works well
in your area, and set that frequency as a preset on your TuneStik.
12
|
DLO TUNESTIK USER MANUAL
|
13
Tips + Troubleshooting
My iPod is not responding to my TuneStik.
Using with a Home Stereo or Other FM Radio
Reset your iPod by toggling the Hold Switch on and then off again. Then press and
hold the Menu and Select Buttons until the Apple logo appears (6 to 10 seconds).
You may need to repeat this step. If this does not work, you can reset the TuneStik
by pressing the Previous Track, Next Track, and the +/- Buttons simultaneously for
6 to 10 seconds.
You can use the TuneStik as a remote control for your iPod with any home stereo
or speaker system. With the TuneStik FM Transmitter connected to your iPod, sim-
ply connect your iPod to your stereo via the headphone jack.
The TuneStik works anywhere you have an FM radio handy. The powerful RF
Remote will let you control your iPod music from up to 75 feet away, so it’s perfect
for hotel rooms, portable speakers or your hi-fi stereo at home.
I’m having trouble finding an empty FM frequency in my area.
Be sure to look in the 100’s, not just in the 80’s or 90’s. Try scanning to a strong
station, then back down two frequencies - for example 103.5 to 103.1. If that fre-
quency is taken, try scanning to the next strong station and repeat. For more infor-
mation read the Finding Empty Radio Frequencies [pg. 12].
Using with an iPod Auto Charger or Wall Charger
The TuneStik also features a pass-through dock connector on the bottom of the
TuneStik FM Transmitter that lets you simultaneously charge your iPod while
enjoying your music. Any standard iPod charging cable, including auto chargers and
wall chargers, will work with the TuneStik. This is important because the TuneStik
FM Transmitter runs off iPod power. Plus, you’ll never have to unplug the TuneStik
FM Transmitter to recharge your iPod on those long road trips.
My music is playing but there seems to be a lot of static.
First, check that you have found an empty frequency. Unplug the TuneStik FM
Transmitter to see if there might be a radio station interfering. If so, try another
frequency. Also, if you are using the TuneStik while connected to an Auto Charger,
please note that some iPod car chargers are not shielded properly and may cause
interference from your car’s electrical system which affects the sound quality of
your TuneStik’s FM transmission. Be sure to purchase a DLO Autocharger or one
of similar quality to ensure proper performance.
NOTE: Some iPod auto chargers are not shielded properly which may cause inter-
ference from your car’s electrical system and affect the sound quality of your
TuneStik. Be sure to purchase a DLO Auto Charger or one of similar quality to
ensure proper performance.
14
|
DLO TUNESTIK USER MANUAL
|
15
Tech Specs
TRANSMITTER
My TuneStik Control keeps reverting to the main playback controls, and
I can’t find my desired frequency.
Dimensions: L2.375" x W0.438" x H1.009" (L60.45mm x W11.13mm x H25.7mm)
Weight: 0.375oz
Remember, when in Frequency Mode, your TuneStik Control will revert back to its
Primary Mode after 10 seconds of inactivity. At that time, the station you were
tuned to will become a new preset on your TuneStik. However, your TuneStik
Control will allow you to tune the TuneStik FM Transmitter before reverting back to
Primary Mode as long as there has not been more than 10 seconds of inactivity (i.e.
pressing a button on the remote).
Antenna: Built-in
Power requirement: iPod connection
Modulation: FM Stereo
Frequencies: 88.1-107.9MHz
Frequency response: 50Hz to 18KHz
Operating range: up to 27ft
FCC compliant: (FCC ID # : UIX0702B)
My radio will only scan to occupied FM stations.
Many car radios default to scan mode for tuning, so they automatically tune to a
radio station. Most of these radios can be switched to manual tuning (consult your
car or stereo manual on how to do this). You can also “find” your TuneStik’s fre-
quency by scanning to it. Most likely, your car stereo’s scan function will automati-
cally find the TuneStik.
RF REMOTE
Operating Range: Up to 25ft
Transmission Method: Radio Frequency
Frequency: 433.92 MHz
Remote Battery: Panasonic CR2025 3V
Remote Dimensions: L2.297” x W1.1” x H0.205” (L58.33mm x W27.95mm x 5.21mm)
Remote weight: 0.25oz
FCC compliant: (FCC ID # : UIX0703B)
16
|
DLO TUNESTIK USER MANUAL
|
17
Warranty
Service + Support
Digital Lifestyle Outfitters Limited Manufacturer’s Warranty
For more information, updates and tips, please visit our website at www.dlo.com
and click Support.
What This Warranty Covers. DLO (Digital Lifestyle Outfitters) warrants this product against defects in materials
and workmanship. This limited warranty applies only to products manufactured by or for DLO.
What This Warranty Does Not Cover. This warranty does not apply to damage caused by: (a) accident, abuse,
misuse, misapplication, ordinary wear, improper maintenance, failure to follow instructions, or products not man-
ufactured by or for DLO; and (b) aftermarket services (including upgrades and expansions).
How Long This Warranty Lasts. This warranty lasts for a period of ninety (90) days from the date of original retail
purchase.
What DLO Will Do. If a defect exists, DLO will exchange the product, at its option, with a product that is new or
has been manufactured from new or serviceable used parts and that is at least functionally equivalent to the orig-
inal product. DLO will warrant a replacement product against defects in materials and workmanship for a period
of ninety (90) days from the date of replacement.
How To Get Service. In order to be eligible for this warranty, you MUST register your purchase at
www.dlo.com/register within thirty (30) days of purchasing this product. If you believe that this product is defec-
tive in materials or workmanship, please e-mail [email protected] with a brief description of the prob-
lem, for further instructions.
No Change To Warranty. No DLO reseller, agent or employee is authorized to make any modification, extension,
or addition to this warranty.
How State Law Applies. This warranty gives you specific legal rights, and you also may have other rights that vary
from state to state, or country.
Restrictions On Implied Warranties. All implied warranties, including, without limitation, warranties of mer-
chantability and fitness for a particular purpose, are limited in duration to the duration of this warranty. Some
states do not allow limitations on how long an implied warranty lasts, so the above limitation may not apply to
you.
Restrictions On Damages. DLO is not responsible for direct, special, incidental or consequential damages result-
ing from any breach of warranty or condition or under any other legal theory (including, without limitation, lost
profits; downtime; goodwill; damage to or replacement of equipment and property; failure to maintain the confi-
dentiality of data stored on the product; and any costs of recovering, reprogramming or reproducing any program
or data stored in or used with products manufactured by or for DLO). Some states and countries do not allow the
exclusion or limitation of incidental or consequential damages, so the above limitation or exclusion may not apply
to you.
W1000-050803-B
18
|
DLO TUNESTIK USER MANUAL
|
19
FCC Statement
Federal Communications Commission Interference Statement
This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
CAUTION: The manufacturer is not responsible for any radio or TV interference caused by unauthorized modifica-
tions to this equipment. Any such modification could void the user’s authority to operate the equipment.
20
|
DLO TUNESTIK USER MANUAL
|
21
Thanks for purchasing the DLO TuneStik
Putting control at your fingertips
DIGITAL LIFESTYLE OUTFITTERS
•
VISIT US AT WWW.DLO.COM
•
©2007
LIFESTYLE OUTFITTERS
DDoIGwITnALload from Www.Somanuals.com. All Manuals Search And Download.
|