Project __________________________
Item____________________________
Quantity _________________________
CSI Section 11400
UC4448N UNDERCOUNTER
Front-Breathing Undercounter Refrigerators
MODELS:
❑ UC4448N
Two section refrigerator
Undercounter with a door
❑ UCD4448N
Two section refrigerator
Undercounter with drawers
STANDARD FEATURES
OPTIONS AND ACCESSORIES
❑ Flat lift off cover
•
All 4400 and 4500 Series units are 100% front
breathing, which allows the unit to be pushed against
a wall or built into a cabinet or an existing line up
Durable, rugged stainless steel sides, top and front
Features Delfield’s exclusive ABS interior (on sides).
ABS is extremely durable - it won’t dent, chip or
corrode and is backed by a limited lifetime warranty
Heavy duty self-closing hinges
❑ 18” wide single tier overshelf
❑ Stainless steel finish on back
❑ Plastic laminate on front
❑ Additional wire shelves
❑ Door lock
❑ Exterior thermometer
❑ Interior lights
❑ Glass door(s)
•
•
•
•
“D” prefix models feature Delfield’s exclusive new
drawer system. Drawers are backed by a 10-year
warranty on the track assembly
❑ *220V/50 Hertz electrical system
*Inclusion of this option will alter electrical
specifications of the unit.
•
•
Environmentally friendly R404A refrigerant
High density foamed in place polyurethane keeps
energy costs low
•
•
Black recessed quick grip handle
Standard on 2” casters for easy cleaning and
installation
•
•
•
•
60-cycle single phase electrical system
7’ cord and plug supplied
Cord spring relief - prevents cord rollover
One epoxy coated wire shelf standard, installed per
door section
Model UC4448N
•
•
ACT solid state electronic control
One year parts and 90 day labor standard warranty.
SPECIFICATIONS
Exterior top is one-piece, 22-gauge stainless steel with the cabinet. Refrigerant flow is controlled by a capillary
Drawers have a 24-gauge stainless steel exterior
with thermoformed ABS plastic interior liner. Drawer
frames are 12-gauge stainless steel. Drawer slides are
11-gauge stainless steel with Delrin bearings. Drawer
units have two drawers. Top drawer holds one 12” x
20” (30.5cm x 50.8cm x 10.1cm) and three 1/6 size
4"-6" deep pans. Bottom drawer holds one 12" x 20"
and three 1/6 size 4" deep pans. Pans are supplied
by others.
tube. Cabinet maintains an interior cabinet temperature of
integral square nosing on the front.
36°F to 40°F (2°C to 4°C).
Exterior back and bottom are two-piece 24-gauge
galvanized steel.
ACT control. ACT electronic, solid state control, mounted
on the exterior rear of the cabinet, allows unit to maintain
precise temperatures in heavy duty conditions.
Exterior ends are stainless steel.
Electrical connections are 115 volt, 60 Hertz, single
phase. Unit has a 7’ (2.1m) long electrical cord and NEMA
5-15P plug.
Interior sides of door models are thermoformed ABS
plastic with integral shelves supports. Interior back is one-
piece 22-gauge stainless steel. Interior bottom and top
are thermoforned ABS plastic. Base is fully insulated with
high-density foamed in place polyurethane.
Casters: Equipment is mounted on 2” (5.08cm) diameter
front locking plate casters. 2.5” (6.35cm) ride height.
Refrigeration system uses HFC-404A refrigerant.
Compressor is 1/5 H.P., with condenser coil and
condensate evaporator mounted on rear of the cabinet.
Evaporator coil are located on the interior rear wall of
Doors have a 24-gauge stainless steel exterior, with
thermoformed ABS plastic interior liner. Cabinet of door
models has one adjustable epoxy-coated wire shelf.
Approval _________________
Date____________________
980 S. Isabella Road
Mt. Pleasant, MI 48858
Phone: 800-733-8948
Fax: 800-669-0619
Email: info@delfield.com
|