™
®
Project __________________________________
Item ____________________________________
Quantity ________________________________
CSI Section 11400
Delfield
Approved _______________________________
Date ____________________________________
UC4472N Undercounter
Front-Breathing Undercounter Refrigerators
Models
•
UC4472N
Three section refrigerator undercounter with doors
Three section refrigerator undercounter with drawers
•
UCD4472N
Options &
Accessories
Standard Features
•
All 4400 and 4500 Series units are 100% front breathing,
which allows the unit to be pushed against a wall or built
into a cabinet or an existing line up
•
•
•
•
•
•
•
•
•
18” wide single tier overshelf
Stainless steel finish on back
Plastic laminate on front
Additional wire shelves
Door lock
•
•
Durable, rugged stainless steel sides, top and front
Features Delfield’s exclusive ABS interior (on sides). ABS
is extremely durable - it won’t dent, chip or corrode and
is backed by a limited lifetime warranty
•
•
Heavy duty self-closing hinges
“D”prefix models feature Delfield’s exclusive new drawer
system. Drawers are backed by a 10-year warranty on
the track assembly
Exterior thermometer
Interior lights
•
•
Environmentally friendly R404A refrigerant
High density foamed in place environmentally friendly,
Kyoto Protocol Compliant, Non ODP (Ozone Depletion
Potential), Non GWP (Global Warming Potential)
polyurethane keeps energy costs low
Glass door(s)
*220V/50Hertzelectricalsystem
*Inclusion of this option will
alter electrical specifications
of the unit.
UC4472N
•
•
•
•
•
•
Black recessed quick grip handle
Standard on 2” casters for easy cleaning and installation
60-cycle single phase electrical system
7’ cord and plug supplied
Cord spring relief - prevents cord rollover
One epoxy coated wire shelf standard, installed per
door section
•
•
ACT solid state electronic control
One year parts and 90 day labor standard warranty.
Specifications
Exterior top is one-piece, 22-gauge stainless steel with
the exterior rear of the cabinet, allows unit to maintain precise
temperatures in heavy duty conditions.
integral square nosing on the front.
Exterior back and bottom are two-piece 24-gauge galvanized
Electrical connections are 115 volt, 60 Hertz, single phase.
steel.
Unit has a 7’ (2.1m) long electrical cord and NEMA 5-15P plug.
Exterior ends are stainless steel.
Casters: Equipment is mounted on 2” (5.08cm) diameter front
locking plate casters. 2.5” (6.35cm) ride height.
Interior sides of door models are thermoformed ABS
plastic with integral shelves supports. Interior back is one-
piece 22-gauge stainless steel. Interior bottom and top
are thermoformed ABS plastic. Base is fully insulated with
high-density foamed in place environmentally friendly, Kyoto
Protocol Compliant, Non ODP (Ozone Depletion Potential),
Non GWP (Global Warming Potential) polyurethane.
Doors have
a
24-gauge stainless steel exterior, with
thermoformed ABS plastic interior liner. Cabinet of door
models has one adjustable epoxy-coated wire shelf.
Drawers have
a
24-gauge stainless steel exterior with
thermoformed ABS plastic interior liner. Drawer frames are
12-gauge stainless steel. Drawer slides are 11-gauge stainless
steel with Delrin bearings. Drawer units have two drawers.
Refrigeration system uses HFC-404A refrigerant. Compressor
is 1/2 H.P., with condenser coil and condensate evaporator
mounted on rear of the cabinet. Evaporator coil are located
on the interior rear wall of the cabinet. Refrigerant flow is
Top drawer holds one 12” x 20” (30.5cm
x
50.8cm
x
10.1cm)
and three 1/9 size 4"-6" deep pans. Bottom drawer holds one
12" x 20" and three 1/9 size 4" deep pans. Pans are supplied
by others.
controlled by
a
capillary tube. Cabinet maintains an interior
cabinet temperature of 36°F to 40°F (2°C to 4°C).
ACT control. ACT electronic, solid state control, mounted on
980 S. Isabella Rd.
Mt. Pleasant, Michigan 48858
Fax: 800-669-0619
Phone: 800-733-8948 or 989-773-7981
|