EverFocus Security Camera 235E User Manual

EVERFOCUS  
Weatherproof Long Range IR Camera  
Operation Instructions  
Model No. EZ230E/235E/330E/335E  
Please read this manual first for correct installation and operation. This manual should be retained  
for future reference. The information in this manual was current when published. The  
manufacturer reserves the right to revise and improve its products. All specifications are therefore  
subject to change without notice.  
PRECAUTIONS  
1. Do not place any object on top of the cover.  
2. Be careful when handling the camera, do not drop it or subject it to strong shock or vibration  
to prevent any damages to it. Do not disassemble it or place it on an unstable base.  
3. Install the camera away from TV, radio transmitter, magnet, electric motor, transformer,  
audio speakers because the magnetic fields generate from above devices will distort the  
video image.  
4. Install the camera away from stoves, or other heat generating devices as the high temperature  
could cause deformation, discoloration or other damages of the camera. Install the camera  
at where the temperature range will stay between -40to 50(-40to 122).  
5. Never aim the camera at the sun or other extremely bright objects whether it is in use or not.  
6. Do not touch the surface of CCD sensor by hand directly. Use a soft cloth to remove the  
dirt from the camera body. Use lens tissue or a cotton tipped applicator and ethanol to clean  
the CCD sensor and the camera lens. When the camera is not in use, put the cover cap on  
the lens mount.  
7. All warnings on the products and in the operating instructions should be adhered to.  
8. Do not use attachments not recommended by the appliance manufacturer as they may cause  
hazards.  
9. Do not allow anything to rest on the power cord. Do not locate this appliance where the cord  
 
PREFACE  
EZ230E/235E/330E/335E series camera is a true day/night, weather-proof, long range IR color  
camera, designed with the 1/3” SONY HAD color CCD to provide a high performance in low  
LUX environment. It is ideal for outdoor applications such as parking lots, gas stations and  
shopping malls.  
FEATURES  
z
z
The electronic shutter and AGC functions allow the camera to be used in environment  
with varying light levels  
The advanced 1/3” SONY Super HAD color CCD provides low light sensitivity 0.3  
Lux/F=1.2 (AGC ON) for EZ230E/EZ235E and 0.4 Lux/F=1.2 (AGC ON) for EZ330E/335E  
Vari-frequency IR control  
z
z
Long IR distance: 30 meters/98 feet for EZ230E/EZ330E and 50 meters/164 feet for  
EZ235E/EZ335E  
z
z
z
z
z
z
Lifespan of High Light IR LED is 20,000 hours  
IP66 weatherproof rated  
Built-in heater for camera to work in low temperature environment  
Cables covered by the bracket, to prevent from intentional destruction  
Internal cable connection provides installation without additional waterproof connection box  
Vandal proof design  
2
 
STANDARD ACCESSORIES  
¾
¾
¾
¾
¾
IR Long Range Camera x 1  
Operation Instructions x 1 (this document)  
Waterproof Connector x 1 (connected to the camera body)  
Bracket x 1  
Mounting kit includes:  
-Long Screws x 4 (for mounting bracket)  
-Short Screws x 4 (for connecting camera body to bracket)  
-Expanding Screws x 4  
-Hex key x 1 (for adjusting bracket)  
-Hexagon wrench x 1 (for adjusting sunshield)  
3
 
DIMENSIONS  
Dimension of holes to holes  
Dimension of Bracket  
215mm/8.6”  
84mm/3.36”  
45mm/1.8”  
100mm/4”  
95mm/3.8”  
80mm/3.2”  
196mm/7.84”  
The dimension of whole camera with bracket  
217mm/8.68”  
350mm/14”  
4
 
NAMES AND FUNCTIONS OF BACK PANEL  
24VAC model  
110V~240VAC model  
2
1
2
1
3
3
1
Video Output Connector  
Connect the video output of the camera to a color monitor or other video devices through a 75  
Ohm type coaxial cable with BNC female connector at backside of the camera.  
2
Power Input Terminal  
Connect to the appropriate power to each model. N/L is used to connect to power in. PE is a  
ground pin.  
3
Cable clips  
Used to fix power cable.  
5
 
INSTALLATION GUIDE  
Sun shield  
Fixing screw for sunshield  
Bracket  
Power connector  
Video output  
6
 
1. Wire coaxial cable and power cable through the bracket.  
Note: Please use RG59/5C2V coaxial cable without connector  
2. Fix the bracket to wall by using 4 screws.  
7