ZV925SL
GE Monogram® 36" Glass Canopy Island Hood
Dimensions and Installation Information (in inches)
*The supplied duct cover fits
8 ft. to 9 ft. ceiling heights.
Order ZX92510 for 9'1" to
10'1" ft. ceiling heights.
This vent hood may be vented to the outdoors or it can be
installed for recirculating operation. All necessary parts
for recirculating operation are supplied with the hood.
No kits required. Must use an 8" round duct.
*Height
to
A decorative duct cover is provided to cover the duct
from the top of the hood to a 7'11" to 9 ft. ceiling.
Ceiling
Accessories:
An optional stainless steel duct cover is available for 9'1"
to 10'1" ceiling heights. Order ZX92510 optional duct cover
at the same time as the vent hood and have on site
2-3/4"
35 7/8"
27 9/16"
before installation.
Dimensions and Clearances:
The vent hood should be installed 24" min. and 30" max.
above the cooking surface, dependent on the ceiling height.
The cooking surface should be at least 36" above the floor.
Installation will be easier if the vent hood is installed before
the range or cooktop/countertop is installed.
This hood can be installed over a Monogram electric or gas
cooktop. It cannot be installed over a Monogram professional
cooktop or range.
Installation Information: Before installing, consult
installation instructions packed with product or available
on monogram.com for current dimensional data.
24" Min.
30" Max.
Note: Installation height should be measured from the
cooking surface to the outer glass sides.
.
36" Min
The exact installation height is determined by the ceiling height
and duct cover trim strips provided with the hood. For optimum
performance, the hood must be installed 24” min. and 30” max.
above the cooking surface.
For answers to your Monogram,® GE Profile™ or
GE® appliance questions, visit our website at
ge.com or call GE Answer Center® service,
800.626.2000.
Listed by
Underwriters
Laboratories
Specification Revised 5/08
130668
|